Moto-build Racing

*** Moto-build Racing Customer Information ***
In the current ecconomic climate prices are continually changing!
We are now asking that if there is not a PAYPAL button
available on the listing, then please call or email to place an order
07956 451470 or motobuildracing75@yahoo.co.uk

When you click on a new window will be launched taking you to Paypal for completion of your transaction
When complete, you may close the window to return to the Moto-build website
IMPORTANT - Please note that all postage prices quoted are for 'Mainland UK' only
Northern Ireland, Europe and Worldwide customers please email for a quote on postage before placing your order.
Northern Ireland, Europe and Worldwide Postage Quote


Scroll down the page to view the items available, then click on the small image to enlarge the picture
For easier navigation, please use the back button on your browser!

ZS Racing in MGOC Championship

For replacement or lowering springs for the ZS See our Suspension Upgrades

click to enlarge
Click to enlarge		 MG ZS 180 Spring Set
These are the world famous Moto-Build Racing 180 springs that you will have read glowing reports about on the forums, 35mm lower, these are the lowest you can go without needing to fit camber adjusting parts.
The price for a set of 4 is £181.00 Postage and Packing is £14.00 UK mainland only.

Total Price
£195.00
 

click to enlarge
Click to enlarge		 ZS Alloy Rear Track Control Arms
A 'New Improved Design' here are the alloy rear track control arms for the ZS180 and ZS 120. They come with uprated bushes, and are considerably lighter than the original steel ones.
Price:£149.00 Postage and Packing £12.00: UK mainland only (if outside UK please contact us for postage rate)

Total Price
£161.00
click to enlarge
Click to enlarge		 Uprated Polyurethane Engine Steady Bush for ZS 180
The ZS180 has an engine steady bar attached to the sump, this takes all the torque of the engine and can deteriorate quite badly, especially when it is covered in oil, this allows the engine to shudder when you let the clutch up in turn puts more strain on the engine mounts, cure all this and accelerate smoother by replacing your old knackered bush with the new polyurethane one, which fits the original steel arm once you have removed the old one. Whilst locating engine much firmer there can be a little more coarseness in it's use. Price:£45.00 inc. Postage and Packing: UK mainland only (if outside UK please contact us for postage rate)

Total Price
£45.00
click to enlarge
Click to enlarge		 Rear Camber Adjuster
'New improved uprated version' Suitable for all MG ZS and Rover 220 turbo, you need these when the car has been lowered more than 30mm to reset the camber angle on the rear wheels. These are a top quality part and very simple to fit and set up.
Price:£92.00
Postage and Packing: £9.00 UK mainland only.

Total Price
£101.00
click to enlarge
Click to enlarge		 MG ZS Adjustable Camber Top Wishbones
When you lower the front of the ZS the front wheels move into a positive camber situation (the top of the wheel sticks out further than the bottom) when what you really want is negative camber for optimum handling, with these arms you can get just that.
Price:£149.00
Postage and Packing: £12.00 UK mainland only.

Total Price
£161.00

Click to enlarge		 Oil Vapour Catch Tank
This catch tank is a 'must' for both Rover Turbos and KV6 Powered MG's
Click on the thumbnail image for a fuller description of this item
Please state red or blue hose
Price £80.00 Postage and Packing £9.00 UK mainland only.

Total Price
£89.00


Click to enlarge		 'Red' Oil Vapour Catch Tank
Red anodised oil vapour catch tank with red hose. Alloy catch tank to help prevent your V6 inlet manifold clogging up, very simple and straightforward to fit, comes with mounting bracket and silicon hoses plus fitting instructions.
Price: £80.00
Postage and Packing £9.00 UK mainland only.

Total Price
£89.00

Click to enlarge		 'Blue' Oil Vapour Catch Tank
Trophy blue anodised oil vapour catch tank with blue hose. Alloy catch tank to help prevent your V6 inlet manifold clogging up, very simple and straightforward to fit, comes with mounting bracket and silicon hoses plus fitting instructions.
Price: £80.00
Postage and Packing £9.00 UK mainland only.

Total Price
£89.00


Click to enlarge		 PG1 Polyurethane Gear Linkage Support Bushes
These are the bushes that support either end of the gear shift rod, so when you are changing the linkage joint bushes you can do these at the same time and renew the lot.
Price: £16.00 Postage and Packing £2.75 UK mainland only.

Total Price
£18.75
click to enlarge
Click to enlarge		 Induction filter kit
MG ZS 180 V6 Induction filter kit Blue or Red hoses with Silver filters (sorry blue filters no longer available)
Priced at £200.00 including VAT. Postage and Packing £10.00 UK mainland only.

Total Price
£210.00


2 Uprated Polyurethane Exhaust Mounts
Most Rover's have 4 or 6 exhaust hanging mounts, the std rubbers do go soggy and can break, but mostly they allow the exhaust to swing around too much, this causes the flexi section to fail and also the exhaust will sometimes clatter against the body or suspension. These polyurethane mounts will last virtually forever and give the exhaust a far steadier and stronger mounting.
Price: £20.00
Postage and Packing £5.00 UK mainland only.
Please NOTE these are now supplied in Red, and not yellow as shown
(we will change the photo a.s.a.p.)

Total Price
£25.00


4 Uprated Polyurethane Exhaust Mounts
Most Rover's have 4 or 6 exhaust hanging mounts, the std rubbers do go soggy and can break, but mostly they allow the exhaust to swing around too much, this causes the flexi section to fail and also the exhaust will sometimes clatter against the body or suspension. These polyurethane mounts will last virtually forever and give the exhaust a far steadier and stronger mounting.
Price: £36.00
Postage and Packing £5.00 UK mainland only.
Please NOTE these are now supplied in Red, and not yellow as shown
(we will change the photo a.s.a.p.)

Total Price
£41.00


6 Uprated Polyurethane Exhaust Mounts
Most Rover's have 4 or 6 exhaust hanging mounts, the std rubbers do go soggy and can break, but mostly they allow the exhaust to swing around too much, this causes the flexi section to fail and also the exhaust will sometimes clatter against the body or suspension. These polyurethane mounts will last virtually forever and give the exhaust a far steadier and stronger mounting.
Price: £55.00
Postage and Packing £5.00 UK mainland only.
Please NOTE these are now supplied in Red, and not yellow as shown
(we will change the photo a.s.a.p.)

Total Price
£60.00



Moto-build Homepage